Removing Rust from Stone
Rust stains can occur both inside and outside the home, caused by iron-containing products, such as metal furniture, tools, fertilisers and leaking pipes, and your stone floors and stairs etc may be susceptible to staining.
The main difficulty when removing rust stains from stone, is finding a product that will not cause harm to the substrate due to the delicate nature of its surface. Corrosive chemicals such as bleach and acid are likely to damage stone, as well as other mineral based substrates.
Our rust remover, Stinky Pinky, has a powerful, non-acid formula that transforms rust compounds into a water-soluble solution, dissolving the stains without causing any harm to the underlying material.
How to Apply Stinky Pink Rust Remover
Preparation: Stinky Pinky requires no dilution prior to use. Remove all grease, dirt and loose materials before application.
Coating: You need to apply a saturated coat to the affected area using either a brush or spray. The rate will vary depending on the surface’s absorbency. For natural stone, we recommend a coverage rate of 2 - 5m² per litre.
Reaction Time: For light staining, Stinky Pinky will get to work in just 10 minutes. For heavier staining, you can leave the formula for up to 2 hours. Apply another coat if the surface dries out.
Rinsing: Thoroughly rinse the area with clean water and allow it to dry. Please note that some immediate discolouration may occur on certain surfaces, but this will fade within 48 hours.
How Will I Know if Stinky Pinky is Working?
Stinky Pinky changes colour on contact with rust. As the name suggests - It’s pink and it stinks!
If Stinky Pinky fails to change colour then the staining is unlikely to be rust so you may need to find a different solution.
Key Features
Non-Acid Formula: Stinky Pinky boasts a non-acidic composition, making it safe and effective for surfaces where other rust removers fall short due to their corrosive nature.
Appropriate For Many Surfaces: With its neutral pH, Stinky Pinky adapts to a variety of substrates, including natural stone, brick, masonry, render, concrete, terracotta, porcelain, granite, marble and most other mineral based substrates.
Easy Application: No dilution required! Simply apply Stinky Pinky™ to the affected area using a brush or sprayer.
Targeted Rust Removal: Stinky Pinky works its magic by converting rust compounds into a water-soluble solution, effectively removing rust stains without harming the underlying surfaces. Its unique formula changes colour on contact with rust, making it easy to see where the product is working.
Final Thoughts
When removing rust from stone, you need to take caution so that you don’t end up damaging the surface of the stone. Stinky Pinky from GK is the perfect solution as our formula is acid-free, ensuring effective rust removal without corrosive chemicals.
Its fast acting formula changes the rust to pink so you can see the product actively working. Once the product has finished, simply wash it away with water and you’re good to go.
