How Do I Clean Rust?
Rust stains are a very common problem both inside and outside the home. They are caused by iron-containing products such as metal furniture, tools, fertilisers and even leaking pipes. While they are common they can be unsightly, so removing rust stains is required to keep surfaces clean.
Cleaning rust can be an arduous task and it may cause damage to the substrate that needs to be cleaned. Finding an effective solution that is safe for various surfaces is the ideal approach to getting rid of these pesky stains.
Stinky Pinky Rust Remover
Stinky Pinky™ from GK is a powerful non-acid rust remover that transforms rust compounds into a water-soluble solution, effectively dissolving the stains without harming the underlying material. Simply rinse away the formula after use and watch the rust stains fade away within 48 hours.
Stinky Pinky™ is specially formulated to address rust stains on even the most delicate surfaces. It contains no caustic acid which makes it safe for use on natural stone, brick, masonry, render, concrete, terracotta, porcelain, granite, marble and most other mineral based substrates.
You can use Stinky Pinky™ rust remover both internally and externally, and it is made from a ready-to-use formulate that doesn’t require any mixing or diluting prior to use. Apply the formula directly onto the stain, leave it to dwell for up to 2 hours depending on the severity of the staining, and then rinse it away with water.
Key Features of Stinky Pinky Rust Remover
Non-Acid Formula: Stinky Pinky™ boasts a non-acidic composition, making it safe and effective for surfaces where other rust removers fall short due to their corrosive nature.
Appropriate For Many Surfaces: With its neutral pH, Stinky Pinky™ adapts to a variety of substrates, including natural stone, brick, masonry, render, concrete, terracotta, porcelain, granite, marble and most other mineral based substrates.
Easy Application - No dilution required! Simply apply Stinky Pinky™ to the affected area using a brush or sprayer.
Targeted Rust Removal: Stinky Pinky™ works its magic by converting rust compounds into a water-soluble solution, effectively removing rust stains without harming the underlying surfaces. Its unique formula changes colour on contact with rust, making it easy to see where the product is working.
How to Apply Stinky Pinky™
No Dilution Required: Stinky Pinky™ comes ready to use. Do not dilute.
Preparation: Remove grease, dirt, and loose materials before application.
Coating: Apply a saturated coat by brush or spray. Rates vary based on surface absorbency.
Reaction Time: Light staining – 10 minutes; Heavy staining – up to 2 hours. Reapply if the surface dries out.
Rinsing: Thoroughly rinse with clean water and allow it to dry.
Note: Some immediate discolouration may occur on certain surfaces, but it will fade within 48 hours.
Can I Use Bleach to Clean Rust Stains?
Do not use bleach on rust stains. Bleach does not remove rust!
You must never apply chlorine bleach to rust stains as it may react with the rust and worsen the discolouration.
Summary
Effectively remove rust stains with Stinky Pinky™. This powerful non-acid rust remover transforms rust compounds into a water-soluble solution, dissolving the stains without harming the underlying material.
