How to Seal Timber Floors
Sealing timber floors will help to protect them against stains, weathering and everyday wear and tear to keep them looking pristine for longer. The best way to effectively seal your timber floors is to use a commercial sealer.
GK Invisible Wood Sealer is a water-based sealing solution designed specifically for use with timber flooring and structures, as well as decking fencing and other wooden structures.
Our high performance, penetrating, repellent sealer has a specially designed formula that penetrates porous surfaces, creating a robust defence against moisture and rot, and uses the latest technology to provide protection with outstanding durability.
GK Invisible Wood Sealer is ready to use, so does not require any dilution. Remember to shake the container well before application.
- Penetrates and seals
- high protection
- Invisible finish
- Anti-stain properties
- Water based
- Environmentally friendly
Key Features of GK Invisible Wood Sealer
Breathable Solution: This special formula allows water vapour to pass through, while preventing water from penetrating the wood which helps to prevent the wood from rotting or delaminating.
Versatile: Can be used on both horizontal and vertical surfaces, both inside and outside your home or premises.
Hard-wearing: The invisible sealant layer is both UVA resistant and highly resistant to wear.
Environmentally Friendly: This water-based solution has a close to neutral pH which makes it safer for the environment.
Mould and Algae Prevention: If used outdoors, GK Invisible Wood Sealer stops the growth of unsightly green material on your wooden surfaces.
How to Apply GK Invisible Wood Sealer
This product is ready to use - do not dilute.
Shake container before use.
Always test a small hidden portion of the timber floor before use, to ensure the final result is satisfactory and to calculate consumption.
Ensure the surface is fully dry and dust free before application.
Apply a generous even coat with a brush, long pile roller or low pressure spray to saturation point.
Once the first coat starts to soak in, apply a further wet on wet coat. This method gives deeper penetration into the surface. Do not allow the product to dry in between applications.
Avoid runs, drips or puddling by removing excess product from the surface using a clean lint free cloth.
Leave to dry.
Surfaces should be touch dry within 2 hours and fully dry after 24 hours.
For flooring and decking, please allow 24 hours before subjecting to heavy traffic.
Summary
To effectively seal timber floors use a commercial sealer such as GK Invisible Wood Sealer. Our specially designed formula provides deep penetration and durability to protect against rot, stains, weathering and delamination.
